Recycled Lignocellulosic Resources for Circular Bioeconomy Applications: Heat-Treated Eucalyptus Fibers in Polyester Composites

The pursuit of alternatives to nonrenewable materials has stimulated the development of sustainable materials with improved performance, particularly polymer composites reinforced with plant-based fibers. In this study, eucalyptus fibers were thermally treated and evaluated as eco-friendly reinforcements for polyester composites, aiming to enhance their physical and mechanical properties. The fibers were subjected to heat treatments between 140 and 230 °C in a Macro-ATG oven, followed by analyses of anatomical characteristics and chemical composition. Composites containing 25% fiber reinforcement were produced using an orthophthalic unsaturated polyester matrix catalyzed with methyl ethyl ketone peroxide, with untreated fibers used as references. Thermal treatment induced significant modifications in fiber morphology and composition, including increases in cell wall fraction at 170 and 200 °C and higher cellulose contents at 140 and 170 °C. Mechanical performance was assessed through tensile, flexural (modulus of rupture—MOR), modulus of elasticity (EB), and impact tests. Composites reinforced with heat-treated fibers exhibited lower apparent density and, notably, those treated at 230 °C showed markedly reduced water absorption and enhanced tensile strength compared with the control. Overall, treatment at 230 °C proved most effective, highlighting the potential of thermally modified eucalyptus fibers as viable reinforcements for high-performance, bio-based polymer composites.