Mechanochemical Recycling of Tire-Derived Styrene–Butadiene Rubber Using a Regeneration Agent

Mechanochemical regeneration aims to selectively cleave the crosslinked network of vulcanized rubber. In this study, a tire-grade styrene–butadiene rubber (SBR) compound was vulcanized and then subjected to mechanochemical regeneration using a zinc (II) dithiocarbamate complex (ZNIBU) at 6, 8, and 10 phr. The regenerated materials were subsequently revulcanized, and their properties were assessed before and after both processing steps. The regenerated (non-revulcanized) samples exhibited reduced crosslink density and increased swelling, indicating effective network cleavage by the regenerator. After revulcanization, the compounds presented higher hardness (23%) but lower tensile strength (75%) and tear strength (25%) compared to the virgin vulcanizate. Overall, ZNIBU proved highly effective for the mechanochemical regeneration of SBR, with optimum performance observed at 8 phr.