Role of Mineral Processing in Enhancing Recycled Concrete Aggregate Quality—A Critical Review

Mineral processing may decisively influence recycled aggregate (RA) production, yet it is systematically underreported. This critical review screened 338 Scopus-indexed publications (2004–2024) and retained 204 studies after eligibility assessment. Reporting on comminution was limited: ~52% (105 studies) of studies did not explicitly mention crushing, while ~26% (53 studies) identified the crusher type, and only about 1% (two articles) reported operating conditions, which undermines reproducibility and cross-study comparability. RA quality is application-/market-dependent. The literature was classified into cement-based materials (46.1%), pavement applications (44.6%), and fundamental studies without application (9.3%). For cement-based materials, water absorption and compressive strength were the most frequently reported primary and secondary properties, respectively. For pavement applications, particle-size distribution and optimum moisture content predominated. Overall, mineral processing directly governs the primary attributes of recycled aggregates (RAs) and indirectly influences their secondary performance outcomes. The main gap identified in the literature is the lack of clear recommendations for processing procedures, which limits the reproducibility and comparability of reported results. To address this limitation, this article proposes a mineral-processing framework intended to standardize both RA processing and reporting practices, thereby improving crosslink study comparability, experimental reproducibility, and evidence-based specification according to end-use requirements.