Adaptive Sliding-Window Filtering for GNSS SPP-Aided Orbit Determination in Earth–Moon Space

Orbit determination in Earth–Moon space is challenged by dynamic-model mismatch and unstable GNSS observation conditions, especially under weak and intermittent signals. To address this issue, this paper proposes a GNSS single-point positioning (SPP)-aided orbit determination method based on adaptive sliding-window filtering. A tightly coupled framework is constructed by integrating orbital dynamics propagation with SPP pseudo-range observations, allowing propagation errors to be corrected in real time through measurement updates. To enhance adaptability under time-varying observation conditions, a dynamic sliding-window strategy is introduced, in which the observation-noise covariance is adjusted according to carrier-to-noise ratio (C/N0) variations. Simulations for three representative Earth–Moon trajectories, including a near-rectilinear halo orbit (NRHO), a distant retrograde orbit (DRO), and a Halo orbit, show that the proposed method significantly outperforms the conventional tightly coupled solution. The three-dimensional RMS position error is reduced from 6.65 m to 1.27 m for NRHO, from 6.57 m to 1.27 m for DRO, and from 5.91 m to 1.44 m for Halo, corresponding to improvements of 80.9%, 80.4%, and 75.4%, respectively. Under a simulated 200-epoch GNSS interruption in the Halo case, the method also improves outage robustness and post-recovery performance, reducing the three-dimensional RMS error by 23.2% in the interruption-centered interval and by 26.1% over the full arc.