Enabling Sensor-Integrated and Sustainable Aerospace Structures Through Additively Manufactured Aluminium Mechanisms for CubeSats

CubeSats are a fundamental tool of space exploration, allowing for the testing of novel ideas that can be upscaled to more efficient satellite systems. This work presents the development and characterisation of an additively manufactured aluminium mechanism designed to enable the self-functionalisation of CubeSat structures through material extrusion metal additive manufacturing, as a foundation for sensor integration. A space-grade AlSi7Mg alloy was selected and prepared as a filament to print a fully functional hinge geometry, aiming to evaluate the feasibility of producing movable metallic components using a low-cost and sustainable extrusion-based process. Produced parts were subjected to debinding and vacuum sintering, achieving a densification above 85% and an average hardness of 52.2 HV. Further characterisation, including micro-computed tomography, X-ray diffraction and dynamic mechanical analysis, was used to assess the microstructural integrity, present phase, and mechanical behaviour of the sintered components. The designed shrinkage-compensated hinge mechanism preserved its rotational mobility after sintering, validating the mechanical inter-locking strategy and the design for additive manufacturing methodology used. The results demonstrate that material extrusion enables the fabrication of lightweight, functional, and integrated aluminium mechanisms suitable for sensor incorporation and actuation in small satellite systems. This proof-of-concept highlights material extrusion as a sustainable and economically viable route for developing intelligent aero-space structures, paving the way for future adaptive and sensor-integrated CubeSat subsystems.