Experimental Laboratory Study on the Acoustic Response Characteristics of Fluid Flow in Horizontal Wells Based on Distributed Fiber Optic Sensing

Distributed acoustic sensing (DAS) has been widely applied to injection–production profile monitoring in horizontal wells because it provides continuous full-wellbore coverage, real-time acquisition, and straightforward long-term deployment. In practical downhole operations, however, DAS measurements are frequently compromised by optical-signal attenuation, loss of fiber–casing/formation coupling, and environmental noise. Meanwhile, the mechanisms governing flow-induced acoustic responses remain insufficiently understood, which continues to impede quantitative diagnosis and interpretation of injection–production profiles based on DAS data. To address these challenges, this study performed controlled laboratory-scale physical simulation experiments of single-phase flow in a horizontal wellbore, systematically investigating DAS acoustic responses under two wellbore diameters (25 mm and 50 mm) and a range of flow velocities. Power spectral density (PSD) was derived using the fast Fourier transform to identify flow-sensitive characteristic frequency bands, and frequency-band energy (FBE) was further used to establish an optimal quantitative relationship with flow velocity. The results show that: (1) DAS energy is dominated by low-frequency components (