Efficient and Rapid Removal of Cationic Methylene Blue from Aqueous Solution by Alkali-Treated Bamboo Powders as Biosorbents

To develop low-cost and renewable materials for treating dye wastewater, an efficient biosorbent was prepared from Bambusa emeiensis bamboo powders (BPs) via a simple alkali pretreatment. Systematic investigation revealed that NaOH concentration was critical for enhancing adsorption performance. Under optimal conditions (NaOH ≥ 0.2 mol/L, dosage = 10.0 g/L), the BPs achieved over 96% removal of cationic Methylene Blue (MB, 20 mg/L) within 20 min, demonstrating rapid kinetics. The adsorption process followed the Langmuir isotherm model with a maximum adsorption capacity of 4.1 mg/g without adjusting the pH of the solution and complied with the pseudo-second-order kinetic model. Thermodynamic analysis confirmed the spontaneous (ΔG < 0) and exothermic (ΔH = −52.73 kJ/mol) nature of the adsorption. Notably, the alkali-treated BPs exhibited a pronounced preference for the cationic dye, achieving a high removal rate of 96.5% for MB, in contrast to a much lower removal of 23.6% for the anionic dye AO7 under identical single-dye conditions, attributed to the enhanced surface negative charge after alkali treatment. Furthermore, the BPs maintained a high removal efficiency of 91.2% after eight adsorption-desorption cycles using 0.1 mol/L HCl as eluent, demonstrating excellent reusability. This study presents a feasible and sustainable strategy for designing regenerative bamboo-based biosorbents with rapid and preferential adsorption capabilities for cationic dye wastewater.