Research on Multi-Actuator Stable Control of Distributed Drive Electric Vehicles

In this paper, a hierarchical adaptive control strategy is proposed to enhance the handling stability of distributed drive electric vehicles. In this strategy, the upper-level fuzzy controller calculates the additional yaw moment and rear wheel angle by utilizing the error between the actual and the target yaw velocity, as well as the error between the actual and the target sideslip angle. The quadratic programming algorithm is adopted to achieve the optimal torque distribution scheme through the lower-level controller, and the electronic stability control system (ESC) is utilized to generate the braking force required for each wheel. The four-wheel steering controller optimizes the rear wheel angle by using proportional feedforward combined with fuzzy feedback or Akerman steering based on the steering wheel angle and vehicle speed, through actuators such as active front-wheel steering (AFS) and active rear-wheel steering (ARS), which generate the steering angle of each wheel. This approach is validated through simulations under serpentine and double-lane-change conditions. Compared to uncontrolled and single-control strategies, the actuators are decoupled, the actual sideslip angle and yaw velocity of the vehicle can effectively track the target value, the actual response is highly consistent with the expected response, the goodness of fit exceeds 90%, peak-to-peak deviation with a small tracking error.