Study of the effect of the injector nozzles number and diameters on the diesel engine parameters

View at publisher Summarise with VIRAT
Authors: Devyanin S.N., Markov V.A., V.L. Trifonov, V. Neverova, Lakutkin I.V.
Cited by: 0

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Modern requirements for diesel engine performance can only be met by significantly improving the quality of fuel injection and atomization processes. It has been shown that the number and diameter of the nozzle’s atomizing holes have a significant impact on these processes. Using the Diesel-RK software package, we conducted computational studies of the working process of a D-245 diesel engine equipped with sprayers with four, five, and six spraying holes with diameters of 0.357, 0.320, and 0.290 mm. At maximum power, the specific effective fuel consumption of the engine with these nozzles was 241.5, 240.5, and 240.3 g/(kW·h), respectively, and the total emissions of nitrogen oxides and particulate matter were 3.70, 3.58, and 3.54 g/(kW·h).The test results of this engine with sprayers with five spraying holes showed that the integral specific mass emission of nitrogen oxides on the modes of the 13-mode test cycle was 6.439 g/(kW·h), carbon monoxide — 4.464 g/(kW·h), hydrocarbons — 2.958 g/(kW·h). Improvement of these indicators is achieved by increasing the number of spraying holes of nozzles from five to six and making sprayers with the exit of spraying holes on the locking cone of the nozzle needle seat. Keywords internal combustion engine, diesel engine, diesel fuel, injector, sprayer, spray hole, exhaust gas toxicity

Fields of Study & Subjects

Engine and Fuel Emissions Advanced Combustion Engine Technologies Biodiesel Production and Applications

Publication details

Journal / source
Truck
Publication date
25 February 2026
Language
EN