Impact of Printing Parameters on Mechanical Properties of 3D Printed Structures Using Fused Deposition Modeling
Summary
No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.
Summarise with VIRAT Free to try with your Science Catalogs account.Abstract
Fused Deposition Modeling (FDM) is one of the most widely adopted Additive Manufacturing (AM) techniques due to its low cost, compatibility with a broad range of materials, design flexibility, and rapid prototyping capabilities.Key printing parameters-such as nozzle diameter, infill pattern and density, print speed, layer thickness, and print orientation-significantly influence the mechanical performance of FDM-printed components.This study investigates the effects of solid infill density, layer thickness, and print orientation on the mechanical properties of parts fabricated using polylactic acid (PLA) and thermoplastic polyurethane (TPU), two of the most used FDM materials.Results indicate that increasing the infill density with an aligned rectilinear pattern from 15% to 100% improves the ultimate tensile strength (UTS) of PLA samples from 36.88 ± 0.37 MPa to 55.71 ± 0.14 MPa, representing a ~51% increase and conversely, altering the infill orientation from 0° (aligned with the loading direction) to 90° (perpendicular) results in a 45.7% decrease in UTS under identical infill conditions.Additionally, increasing the layer height from 150 μm to 300 μm leads to a 22% reduction in UTS.Comparative analysis reveals that while TPU exhibits significantly less UTS than PLA, it achieves an approximately 36-fold increase in ultimate tensile strain, underscoring its superior ductility.These findings offer valuable insights into how FDM printing parameters influence the mechanical performance of printed parts, guiding material and process selection for application-specific requirements.
Fields of Study & Subjects
Additive Manufacturing and 3D Printing Technologies
Additive Manufacturing Materials and Processes
Innovations in Concrete and Construction Materials
Publication details
- Journal / source
- International journal of high school research
- Volume
- 8
- Issue
- 4
- Pages
- 76–82
- Publication date
- 28 February 2026
- Language
- EN