Multi-Layer Aluminum–Polymer Hybrid Structures for Improved Automotive Impact Performance

Read full text Summarise with VIRAT
Authors: Nantha Kumar P, K. Arun, Sachin S. Harak, M.Suresh Kumar, DVSSSV Prasad, K. Amudha, V. Kavimani, A. Vijayalakshmi
Cited by: 0
References: 24

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Layered metal-polymer hybrid laminates have emerged as promising candidates for lightweight automotive structures requiring high impact resistance and structural reliability.In this study, aluminum/glass-epoxy hybrid laminates were fabricated using a symmetric stacking sequence through hot compression molding to evaluate their mechanical and energy absorption performance.Density analysis revealed an average measured density of 2.34 g/cm³, closely matching the theoretical value of 2.36 g/cm³, with a deviation of approximately 1.02%, indicating effective consolidation.The calculated void fraction remained below 2% (average 1.02 ± 0.45%), confirming minimal internal defects and strong interfacial bonding.Tensile testing demonstrated a nonlinear stress-strain response characterized by initial elastic deformation followed by gradual yielding of aluminum layers, resulting in enhanced load-sharing capability and delayed failure.The hybrid laminates exhibited substantially higher tensile strength than monolithic aluminum of equivalent thickness, accompanied by progressive fracture rather than brittle collapse.Under three-point bending, the laminates displayed high initial stiffness and sustained increasing loads even after the onset of localized yielding and matrix cracking, highlighting efficient stress transfer across layers.Low-velocity impact tests conducted at energies ranging from 10 to 40 J revealed multi-stage damage evolution.At lower energies, localized denting dominated, while higher energies produced controlled delamination and fiber fracture without complete penetration.This behaviour demonstrates superior energy absorption and damage tolerance compared to conventional composites.Overall, the developed hybrid laminates exhibit an optimal balance of stiffness, strength, and impact resistance, making them strong candidates for nextgeneration automotive body panels requiring lightweight yet crashworthy materials.

Fields of Study & Subjects

Mechanical Behavior of Composites Cellular and Composite Structures Fiber-reinforced polymer composites

Publication details

Journal / source
Journal of Polymer & Composites
Publication date
1 January 2026
Language
EN