Relationship between Maximum Bending Stress and Surface Roughness of AZ31 Magnesium Alloy Fully Corroded in Salt-Water Environment

AZ31 magnesium alloy is a representative magnesium alloy with well-balanced mechanical properties and castability. However, AZ31 magnesium alloy also has the disadvantage of poor corrosion resistance due to its low aluminium content. In previous research, it is known that the corrosion mechanism is such that filamentous corrosion is generated and then changes to full-scale corrosion. However, the relationship between corrosion and bending properties has not been revealed. In this study, AZ31 magnesium alloy was immersed in salt water with a concentration of 5%, and three-point bending tests were conducted to confirm changes in bending stress and strain due to strength loss caused by corrosion. Then, investigated which parameters Ra and Rz, which are indicators of surface roughness, are related to the maximum bending stress of the fully corroded AZ31 magnesium alloy. As a result, when evaluating the relationship between maximum bending stress and corrosion, it was found that it is better to evaluate by Ra of the corroded surface rather than by Rz.