Effects of Fiber Type and Hybridization on the Tensile Properties and Fracture Behavior of Epoxy Composites

This study investigates the effects of fiber type and hybridization on the tensile properties of epoxy composites produced using the temperature-controlled vacuum-assisted resin transfer molding (VARTIM) method. Tensile strengths and fracture behaviors are examined by fabricating 6-layer glass fiber-reinforced composites [G6], 6-layers carbon fiber-reinforced composites [C6], and hybrid composites consisting of six layers of glass and carbon fibers [H1] and [H2]. The microstructures of the composites are analyzed using an optical microscope, and tensile tests are conducted in accordance with ASTM standards. Tensile tests are performed at a constant speed and room temperature, and the fracture surfaces after tensile testing are analyzed using a Stereo Microscope. The results showed that the highest tensile strength is achieved in the carbon fiber-reinforced composite (CFRP), with an increase of approximately 123% compare to the glass fiber-reinforced composite (GFRP). Hybrid composite exhibits the reduced tensile strength compare to CFRP, with decreases of 23% for H2 and 29% for H1, respectively, whereas, increased the fracture toughness of the tested samples. Additionally, fracture surface analysis reveals that GFRP exhibits incomplete separation of the fractured surfaces, while CFRP shows a brittle and clean fracture surface. This study highlights the significant impact of fiber type and hybridization on the tensile property and fracture behavior of epoxy composite, demonstrating the better tensile performance of CFRP, while improving the fracture toughness and manufacturing cost of both GFRP and Hybrid composite.