Effect of Renewable Fuel Blends on Particulate Emissions in Warm-Up Conditions in a GDI Engine

View at publisher
Authors: Krishnamoorthi Muniappan, Petter Dahlander, Ayolt Helmantel, Nika Alemahdi, Kalle Lehto
Cited by: 1
References: 45

Abstract

Renewable gasoline offers significant benefits in reducing greenhouse gas (GHG) emissions. In this study, five gasolines with different renewable hydrocarbon classes and varying distillation curves were taken to investigate their effect on particle number (PN) emissions in a spark-ignition GDI engine at 10 bar indicated mean effective pressure (IMEP) and 2000 rpm. The engine coolant temperature was varied from 90°C to 35°C to investigate the effect of fuel evaporation on soot formation. Injectors with various spray plume targets and start of injection (SOI) timing (300° and 260° bTDC) were used to assess how different gasolines affect engine performance and to determine engine calibration requirements. A simplified transient cycle examines how engine motoring influences PN emissions for test gasolines. A high-speed camera and endoscope were used to identify the sources of soot during fuel combustion. Simulations were done to assess the quality of fuel-air mixing in support of the experimental data. The results revealed that the type of hydrocarbons in gasoline was crucially affecting PN emissions. Particles with >10 nm increased with increasing fuel’s aromatics. Paraffin-rich gasoline showed 71% and 98% lower PN than aromatics-rich gasoline under hot and cold engine conditions. Paraffin-rich gasoline showed lower PN in cold tests than in hot tests with retarded SOI. Replacing ~10% paraffins with olefins and naphthene reduced >10 nm PN by 15-77%. However, replacing 19% of paraffins with olefins and naphthene increases PN emissions. Optimal SOI timing reduces PN by 80% for aromatics-rich gasoline. Fuel consumption and hydrocarbon (HC) emissions increased with increasing aromatics and paraffins in gasoline under cold conditions. Yellow flames on the piston top and near the injector tip were the primary sources of soot. Simulation results showed that the liquid fuel mass increased by 14% when the coolant temperature was reduced by 55 K.

Fields of Study & Subjects

Advanced Combustion Engine Technologies Biodiesel Production and Applications Vehicle emissions and performance

Publication details

Journal / source
SAE technical papers on CD-ROM/SAE technical paper series
Publisher
SAE International
Volume
1
Publication date
7 April 2026