NUMERICAL STUDY ON THE CO-INJECTION CHARACTERISTICS OF COAL AND AMMONIA IN A SWIRL BURNER
Summary
No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.
Summarise with VIRAT Free to try with your Science Catalogs account.Abstract
Co-firing NH3 with coal is a promising solution for reducing CO2 emissions, although it remains relatively new technology in Vietnam. This study employs CFD simulation using STAR-CCM+ software to perform the spray characteristics and NH3 concentration distribution in a swirl burner, with a co-firing ratio of 10% NH3, based on thermal input. The ammonia injection tube length was adjusted at five positions of 0 m, 0.4 m, 0.8 m, 1.0 m, and 1.2 m. Results show that the injector position significantly affects flow behaviors and NH3 concentration. At 0.8 m, a central recirculation zone (CRZ) begins to form with a swirl number of 0.277. At 1.0 m, the CRZ becomes stable, and the lowest NH3 concentration (0.3165 m³) is observed, indicating favorable conditions for stable combustion. Increasing the injector length reduces the volume of high NH3 concentration regions, thereby improving combustion efficiency and limiting NH3 presence in high-oxygen zones. These findings provide valuable technical insights for the design and operation of burners in coal–ammonia co-firing systems.
Fields of Study & Subjects
Combustion and flame dynamics
Coal Combustion and Slurry Processing
Advanced Combustion Engine Technologies
Publication details
- Journal / source
- Journal of Science and Technology - IUH
- Volume
- 79
- Issue
- 1
- Publication date
- 25 March 2026
- Language
- EN