Wavefront Error Recovery and Companion Identification with the James Webb Space Telescope

The James Webb Space Telescope is orders of magnitude more sensitive than any other facility across the near to mid-infrared wavelengths. Many approved programs take advantage of its highly stable point spread function (PSF) to directly detect faint companions using diverse high-contrast imaging (HCI) techniques. However, periodic re-phasing of the Optical Telescope Element (OTE) is required due to slow thermal drifts distorting to the primary mirror backplane along with stochastic tilt events on individual mirror segments. Many programs utilize observations of a reference star to remove the stellar contribution within an image which can typically take half of the total allocated time. We present a high-contrast imaging technique for the NIRISS instrument that uses the measured wavefront error (WFE) from a phase calibration observation (performed roughly every 48 hours) as prior information in a Bayesian analysis with nested sampling. This technique estimates the WFE of a given observation and simultaneously searches for faint companions, without using a reference star. We estimate the wavefront error for both full aperture and aperture masking interferometry (AMI) imaging modes using three low order Zernike coefficients per mirror segment, using the Hexike basis, to generate synthetic PSFs and compare to simulations. We compare our technique to traditional interferometric analysis in realistic NIRISS F430M simulations both relative to the photon noise limit, and through recovering an injected companion with contrast of 8 mag at 0.2′′. This approach will save significant amounts of observing time in most HCI observing modes.