Abstract
The surface roughness of rubber cots mounted on drafting rollers is a critical quality parameter governing yarn evenness, end-break rate, and fabric defect levels in ring-spinning, compact spinning, and roving systems. This paper presents and rigorously analyses a physics-based semi-empirical predictive model — the COT-Ra Model — for the arithmetic mean surface roughness (Ra) of synthetic rubber cots generated during cylindrical external buffing with aluminium oxide (AlOx) abrasive wheels. The model is derived from the classical Malkin-Backer kinematic grinding roughness framework and extended with a visco-elastic material correction factor (Kr) parameterised through Shore A hardness to account for rubber's unique elastic recovery behaviour during abrasive contact. The governing equation expresses Ra as a function of ten independent process variables: Shore A hardness, abrasive wheel diameter and rotational speed, FEPA grit number, wheel porosity, active grain fraction, cot diameter and rotational speed, buffing contact time, and total material removed. All intermediate derived quantities — material constant, Young's modulus, elastic recovery, grain size, stone surface speed, cot surface speed, speed ratio, revolutions during contact, depth of cut per revolution, and active grain density — are derived from first principles and presented with full mathematical traceability. Parametric sensitivity analyses demonstrate that grit number, stone speed, and Shore A hardness are the dominant Ra drivers, while speed ratio (Vw/Vs) exerts a square-root influence consistent with classical grinding theory. Ra specification windows for five spinning count-fibre categories (Coarse Ne 1-20, Medium Ne 20-40, Fine Ne 40-80, Super Fine Ne 80-120+, and 100% Man-Made Fibres) are established from industry practice. The model is implemented as an interactive digital tool (COT-Ra Analyzer v1.0) capable of real-time prediction, multi-parameter sensitivity sweep, ISO N-grade mapping, and export to CSV/JSON. Model validity is established for Shore A 60-90° and FEPA grit 60-180 with AlOx abrasives, with predicted accuracy within ±20-30% of profilometer measurements. The practical implications for spinning mill cot maintenance schedules, buffing machine setup optimisation, and quality control SPC integration are discussed in detail.