University of New Hampshire Pressure Sticks and SediMeter Deployment January 2025 - Dedalus Numerical Modeling Results
Summary
No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.
Summarise with VIRAT Free to try with your Science Catalogs account.Abstract
This project contains processed data and modeled results from observations collected by the University of New Hampshire (UNH) Coastal Processes Lab in a field experiment in January 2025. Please see Marry (2026) (https://doi.org/10.5281/zenodo.19260240) for a full description of that experiment and for the raw data files. The field experiment included two pressure profiling instruments known as Pressure Sticks (PS) and a optical backscatter instrument, the SediMeter (SM) from Lindorm Inc. The PS's measure the wave-induced pressure through the water column and into the sediment bed. The SediMeter measures the location of the sediment-water interface. Here, these field observations are compared to a numerical solution of the Biot Consolidation equations for pressure within the sediment bed. The set of partial differential equations of the problem are solved by spectral methods using an open-source computational framework, called the Dedalus Project (https://dedalus-project.org/). The field observations are used as the ground truth to assess the accuracy of the model. This dataset is presented in the manuscript, "Vertical Propagation of Wave-Induced Pressure Within Nearshore Sediment Beds: Field Observations and a Numerical Solution" (Marry & Foster, XXXX) which has been submitted to the Journal of Geophysical Research: Oceans in 2026. Dataset files. A description of each data file is given below: Pressure Stick Data1. UNH_PS1data_PS2data_Jan25_10min.csv This file contains data from the Pressure Stick version 1 (PS1) and the Pressure Stick version 2a (PSv2a), where the values have been calculated for 10-minute segments of data throughout the full deployment time (January 18th 2025 8:40:00 – January 20th 2025 12:00:00). Used to plot Figure 4 in (Marry & Foster, XXXX). 2. UNH_PS1data_PS2data_Jan25_Spectra.csv This file contains data from the spectral analysis of the Pressure Stick version 1 (PS1) and the Pressure Stick version 2a (PSv2a) data for a twenty-minute time segment (January 19th 2025 15:00:00 – 15:20:00). Used to plot Figure 8 in (Marry & Foster, XXXX). Dedalus (Model) Data 1. UNH_DedalusPSY_Jan25_Raw_TCX.csv (Data files for the full modeled solution from Dedalus using both Pressure Sticks divided by tidal cycle for each instrument and in compressed files) These files contain the numerical solution for modeled pressure within the sediment bed using the Dedalus Project and forced with the Pressure Sticks data for the full deployment time (January 18th 2025 8:43:00 – January 20th 2025 10:37:00). The data is divided up by Pressure Stick forcing (Pressure Stick 1 or Pressure Stick version 2a) and by tidal cycle. In the file name above, the ‘Y’ indicates the Pressure Stick and will be ‘1’ (Pressure Stick 1) or ‘2’ (Pressure Stick version 2a). The ‘X’ indicates the tidal cycle and will be either ‘0’, ‘1’, ‘2’, or ‘3’, where the increasing tidal cycle number indicates further along in time. Note due to large file sizes, the ‘.csv’ files are compressed. 2. UNH_Dedalusdata_Jan25_Spectra.csv This file contains data from the spectral analysis of the numerical model for pressure within the sediment bed (from utilizing the Dedalus Project) for a twenty-minute time segment (January 19th 2025 15:00:00 – 15:20:00). Both Pressure Stick version 1 (PS1) and the Pressure Stick version 2a (PSv2a) data are used to force the numerical solution. If a column within the matrix of any of the variables is completely ‘NaNs’ then that columns is for a pressure sensor location that is in the water column and is thus not modeled with the numerical solution. Used to plot Figure 9 in (Marry & Foster, XXXX). Combined Pressure Stick and Dedalus (Model) Data1. UNH_PS1data_Jan25_2min_Compare2Dedalus.csv and UNH_PS2data_Jan25_2min_Compare2Dedalus.csv These files contain data from the Pressure Stick version 1 (PS1), the Pressure Stick version 2a (PSv2a) and the pressure results from the numerical model (using the Dedalus Project) for a two-minute time series of data (January 19th 2025 15:10:00 – 15:12:00). Also contains root mean square and root mean square error results between the observations and the model for a twenty-minute time series of data (January 19th 2025 15:00:00 – 15:20:00). Used to plot Figures 6 and 7 in (Marry & Foster, XXXX). 2. UNH_PS1data_PS2data_Dedalus_Jan25_CEOF_20min.csv This file contains data from the Complex Empirical Orthogonal analysis (CEOF) of the Pressure Stick version 1 (PS1) data, the Pressure Stick version 2a (PSv2a) data, and the numerical model for pressure within the sediment bed (from utilizing the Dedalus Project) for a twenty-minute time segment (January 19th 2025 15:00:00 – 15:20:00). Both Pressure Stick version 1 (PS1) and the Pressure Stick version 2a (PSv2a) data are used to force the numerical solution. If a row within the matrix of any of the variables is completely ‘NaNs’ then that columns is for a pressure sensor location that is in the water column and is thus not modeled with the numerical solution. The CEOF is calculated at five frequencies of interest where the frequencies are selected as multiples of the incident frequency, specifically 0.5, 1.0, 2.0, 3.0, and 4.0 times the incident frequency. Used to plot Figure 10 in (Marry & Foster, XXXX). 3. UNH_PS1data_PS2data_Dedalus_Jan25_CEOF_TidalCycleRanges.csv This file contains data from the Complex Empirical Orthogonal analysis (CEOF) of the Pressure Stick version 1 (PS1) data, the Pressure Stick version 2a (PSv2a) data, and the numerical model for pressure within the sediment bed (from utilizing the Dedalus Project) for the full deployment time (tidal cycles (TCs) 1 – 3, January 18th 2025 23:00:00 – January 20th 2025 7:00:00). Both Pressure Stick version 1 (PS1) and the Pressure Stick version 2a (PSv2a) data are used to force the numerical solution. CEOFs are calculated for every 20-minute segment of data and only the incident frequency CEOF is shown. The data is separated by the phase of the tidal cycle (or the water depth) into six groups; swash rising tide (SRT), middle (mid) rising tide (MRT), rising high tide (RHT), falling high tide (FHT), middle falling tide (MFT), and swash falling tide (SFT). Used to plot Figure 11 in (Marry & Foster, XXXX). 4. UNH_PS1data_PS2data_Dedalus_Jan25_CEOF_3fi_TidalCycleRanges.csv This file contains data from the Complex Empirical Orthogonal analysis (CEOF) of the Pressure Stick version 1 (PS1) data, the Pressure Stick version 2a (PSv2a) data, and the numerical model for pressure within the sediment bed (from utilizing the Dedalus Project) for the full deployment time (tidal cycles (TCs) 1 – 3, January 18th 2025 23:00:00 – January 20th 2025 7:00:00). Both Pressure Stick version 1 (PS1) and the Pressure Stick version 2a (PSv2a) data are used to force the numerical solution. CEOFs are calculated for every 20-minute segment of data and only the CEOF at the second harmonic frequency, which is 3 times the incident frequency, is shown. The data is separated by the phase of the tidal cycle (or the water depth) into six groups; swash rising tide (SRT), middle (mid) rising tide (MRT), rising high tide (RHT), falling high tide (FHT), middle falling tide (MFT), and swash falling tide (SFT). Used to plot Figure 12 in (Marry & Foster, XXXX). Dedalus (Model) Python Codes 1. Dedalus_PS_20minSections_Jan25_PubCode.py This software file numerically solves the boundary value problem for pressure within the sediment bed using the Dedalus Project and forces with field observations. This code separates the data into 20 minutes segments to help with computational times when utilizing Dedalus and to account for changes in water depth due to tidal ranges. Then all of the 20 minute sections from an experiment can be combined into one data file. 2. func_Dedalus_InputSedProp.py This software function file is what is actually called to utilize Dedalus to solve the boundary value problem for a specific 20 minute segment of data. 3. nondim_flow_pressure_HTh.py This software function file calculates various hydrodynamic parameters needed to nondimensionalize the pressure record before solving the set of differential equations.
Fields of Study & Subjects
Coastal and Marine Dynamics
Underwater Acoustics Research
Aquatic and Environmental Studies
Publication details
- Journal / source
- Zenodo (CERN European Organization for Nuclear Research)
- Publication date
- 27 March 2026
- Language
- EN