STUDY OF THE PROCESS OF PRELIMINARY AROMATIZATION OF REFORMING FEEDSTOCK ON A ZEOLITE-CONTAINING CATALYST

Read full text Summarise with VIRAT
Authors: Aliev Ziya S, Aghazada N.
Cited by: 0

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Due to the growth in automobile gasoline consumption, the reduction of global oil reserves, and the continuous introduction of new requirements for the quality of motor fuels and their chemical composition, great attention is paid to improving catalytic reforming technologies [5]. The efficiency of the reforming process as a whole can be increased through the development and implementation of new catalysts, as well as through the improvement of technological equipment and process schemes. A zeolite-containing catalyst was used as the object of the study. The further direction of research was determined — the selection of optimal operating parameters for a zeolite-containing dehydrocyclooligomerization catalyst under the conditions of the preliminary aromatization process of reforming feedstock. All processes were carried out in the temperature range of 300–400 °C, at a pressure of 1 MPa, with a volumetric feed rate from 1 h⁻¹ to 4 h⁻¹. The highest content of aromatic hydrocarbons was recorded in samples obtained at temperatures of 350 °C and 375 °C — 18.7 vol.% and 17.9 vol.% respectively, which corresponds to an increase of 7.9 wt.% and 7.1 wt.% compared to the feedstock. The difference in aromatic hydrocarbon content between samples obtained at volumetric feed rates of 1 h⁻¹ and 4 h⁻¹ is relatively small and amounts to 2.1 vol.%.

Fields of Study & Subjects

Zeolite Catalysis and Synthesis Petroleum Processing and Analysis Catalysis and Hydrodesulfurization Studies

Publication details

Journal / source
Zenodo (CERN European Organization for Nuclear Research)
Publication date
1 April 2026
Language
EN