Development and Characterization of Hybrid Biochar from Palm Kernel and Periwinkle Shells for CO₂ Capture
Summary
No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.
Summarise with VIRAT Free to try with your Science Catalogs account.Abstract
This study investigates the production and characterization of a hybrid biochar derived from palm kernel shells (PKS) and periwinkle shells (PWS) through an optimized co-pyrolysis process for potential CO₂ capture applications. A 2³ full factorial design was employed to examine the influence of pyrolysis temperature, residence time, and PKS: PWS blending ratios on biochar yield and adsorption behaviour. The optimal biochar, produced at 300 °C for 60 minutes with a 30:70 PKS:PWS ratio, exhibited a specific surface area of 295 m² g⁻¹ and a predominantly mesoporous structure with pore sizes in the 2–3 nm range. Characterization using SEM-EDS, FTIR, and BET confirmed a heterogeneous surface morphology, the presence of oxygen- and carbonate-containing functional groups, and a combined carbonaceous–mineral composition arising from both feedstocks. Dynamic fixed-bed adsorption experiments showed that the hybrid biochar achieved a CO₂ adsorption capacity of 1704.55 mg CO₂/g adsorbent (38.74 mmol CO₂/g adsorbent) under flue-gas-representative conditions. The breakthrough capacity, defined as the fraction of the bed utilized before CO₂ breakthrough, was 77.8%. The low characteristic adsorption energy obtained from Dubinin– Astakhov modelling (0.653 kJ mol⁻¹) indicates weak adsorbate–adsorbent interactions, supporting rapid adsorption–desorption behaviour suitable for cyclic processes such as pressure swing adsorption. The combined structural and chemical features of the hybrid biochar highlight its potential as a low-cost, scalable adsorbent for CO₂ capture. Future work will focus on assessing performance under industrially relevant conditions, including higher CO₂ concentrations, humidity, and the presence of flue-gas impurities, as well as exploring broader environmental applications of the material.
Fields of Study & Subjects
Carbon Dioxide Capture Technologies
Thermochemical Biomass Conversion Processes
Adsorption and biosorption for pollutant removal
Publication details
- Journal / source
- Zenodo (CERN European Organization for Nuclear Research)
- Publication date
- 1 January 2026
- Language
- EN