Membrane system design for organic solvent recovery applications with a focus on the pharmaceuticals industry
Summary
No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.
Summarise with VIRAT Free to try with your Science Catalogs account.Abstract
Used organic solvents contribute to large volumes of hazardous waste in various industries; the pharmaceuticals industry is a particularly high waste-generating sector, producing 25-100kg waste per kg product, of which 50-60% by mass is due to organic solvents (1). Recovery and reuse of the discharged solvent would reduce energy and material consumption as well as waste discharge associated with virgin solvent manufacture for the relevant industry. Where solvent recovery is practiced, distillation remains the prevalent technology despite its high energy requirement, and the complication of additional solvent required for azeotropic and close-boiling mixtures (2). Membrane separations have emerged as a promising alternative to distillation, with an expected energy reduction of an order of magnitude in cases where the membrane system successfully meets the separation requirements (3). However, focus on system design studies for membranes in solvent media applications remains limited, with the major research avenue in recent years being membrane synthesis to widen the range of applications (4). In this presentation, two solvent recovery applications identified from collaboration with Indian pharmaceutical companies, will be discussed from a system design perspective. Emphasis will be laid on the methods developed in Dr. Roy’s group at IISc to enable methodical and intuitive membrane system analysis as well as how the membrane system is integrated with other steps in the industrial process scheme (5–8). In the first segment, design considerations and performance metrics for pervaporation-based azeotrope splitting will be discussed in the context of alcohol-water separations using commercially available membranes; this discussion motivates the need for a unified analysis framework to enable comparison of the numerous operating parameters and their influence on the system design. The framework derived by Dr. Roy’s group will be described, and applied in comparing membranes, feed temperatures, and elucidating the effect of system staging, with reference to several system performance metrics that are obtained from a single plot. The second application involves the use of organic solvent nanofiltration (OSN) to concentrate the high value phytochemical, curcumin, after extraction from turmeric, thereby replacing the conventional solvent evaporation step. In this application, various organic solvents, including ethanol, acetone, and ethyl acetate, are considered for extraction of curcumin from turmeric, and the optimal choice of solvent must not only allow a high extraction efficiency, but also a favorable solvent permeation flux and curcumin separation in the membrane step, as well as high purity curcumin recovery in the final precipitation step. The unified framework for system analysis is adapted to the membrane system in this application, allowing a comparison of solvents, membranes, and operating parameters, on the various aspects of system performance, on a single plot. Integration of the membrane system with the extraction and precipitation is discussed, and the changeover of the conventional process scheme to a more sustainable one, enabled primarily by the OSN system, is demonstrated. References: [1] M. J. Savelski, C. S. Slater, P. V. Tozzi, and C. M. Wisniewski, “On the simulation, economic analysis, and life cycle assessment of batch-mode organic solvent recovery alternatives for the pharmaceutical industry,” Clean Technol. Environ. Policy, vol. 19, no. 10, pp. 2467–2477, Dec. 2017, doi: 10.1007/s10098-017-1444-8. [2] R. P. Lively and D. S. Sholl, “From water to organics in membrane separations,” Nat. Mater., vol. 16, no. 3, pp. 276–279, 2017. [3] D. S. Sholl and R. P. Lively, “Seven chemical separations to change the world,” Nature, vol. 532, no. 7600, pp. 435–437, 2016. [4] H. A. Le Phuong, C. F. Blanford, and G. Szekely, “Reporting the unreported: The reliability and comparability of the literature on organic solvent nanofiltration,” Green Chemistry, vol. 22, no. 11, pp. 3397–3409, 2020, doi: 10.1039/d0gc00775g. [5] A. Anilkumar and Y. Roy, “A unified, mathematical framework for pervaporation system design—Illustrated for alcohol dehydration,” Journal of Industrial and Engineering Chemistry, 2025, doi: 10.1016/j.jiec.2025.11.028. [6] M. M. Mavinkurve and Y. Roy, “Organic solvent nanofiltration decision-making framework for industrial processes: a case study of curcumin extract concentration,” Sep. Purif. Technol., vol. 379, Dec. 2025, doi: 10.1016/j.seppur.2025.134969. [7] A. Anilkumar and Y. Roy, “Improved solution thermodynamics modeling in pervaporation,” Chem. Eng. Sci., vol. 299, Nov. 2024, doi: 10.1016/j.ces.2024.120497. [8] M. M. Mavinkurve and Y. Roy, “Analytical framework for nanofiltration processes with imperfect rejection and its application to curcumin concentration,” Sep. Purif. Technol., vol. 359, Jun. 2025, doi: 10.1016/j.seppur.2024.130426.
Fields of Study & Subjects
Membrane Separation and Gas Transport
Membrane Separation Technologies
Process Optimization and Integration
Publication details
- Publication date
- 30 March 2026
- Language
- EN