Recovery of Cobalt and Nickel from tailings of the Co Dinh chromite benefication plant in the hydroxide precipitates form
Summary
No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.
Summarise with VIRAT Free to try with your Science Catalogs account.Abstract
Nickel (Ni) and Cobalt (Co) are valuable metals widely used in many important fields, and they occur predominantly in laterite ores. The recovery of these metals was carried out through a sequence of steps including atmospheric – pressure leaching, solution purification, and precipitation in the form of hydroxides. After fine grinding, the ore was directly leached with H2SO4 at 90 oC for 5 hours at pH < 0.5 and a stirring speed of 250 rpm. The results show that at an R/L ratio of 20%, the addition of Na2SO4 and H2O2 at 10% (by ore mass) and 1.2% (by leach solution volume), respectively, yielded dissolution efficiencies of 94.5% for Ni and 87.7% for Co. The pregnant leach solution was purified via two neutralization stages: pH = 3.5 to selectively remove Fe/Cr/Al impurities and pH = 4.5 to remove the remaining fractions of these impurities without losses of Ni and Co. Hydroxide precipitation at pH = 9 achieved nearly complete recovery of Ni and Co; Mg co- precipitation was very low (approximately 1.7%), whereas Mn co-precipitation increased (45.66%) but can be readily addressed in subsequent refining steps. Overall, the results indicate that the combined leaching-purification-precipitation process can effectively recover the valuable metals Ni and Co as a mixed hydroxide precipitate (MHP).
Fields of Study & Subjects
Extraction and Separation Processes
Metal Extraction and Bioleaching
Bauxite Residue and Utilization
Publication details
- Journal / source
- Journal of Science and Technology of Metal
- Volume
- 122
- Publication date
- 10 March 2026
- Language
- EN