Stabilization of Expansive Clay Using Calcium Lignosulfonate for Subgrade Application
Summary
No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.
Summarise with VIRAT Free to try with your Science Catalogs account.Abstract
The expansive clay soils like black cotton soil are very difficult in civil engineering because of high plasticity and swelling capacity as well as low bearing capacity. To enhance the engineering characteristics of these problematic soils, soil stabilization is normally embraced. An experimental study was conducted in the current research to determine the impact of calcium lignosulfonate on strength properties of clayey soil. The black cotton soil was sprayed with different percentages of calcium lignosulfonate in 1, 2, 3, 4 and 5 percent of weight of dry soil. The laboratory tests involved Atterberg limits, compaction properties, and California Bearing Ratio (CBR) tests to determine the enhancement of the soil properties. It was found that there was a visible decrease in plasticity and an increase in the compaction properties after the presence of the stabilizing agent was added. CBR values were found to rise sharply with the chemical content to reach an optimum dosage of 4, than the change was minimal. The greatest value of CBR occurred at 4% calcium lignosulfonate, which shows that the stabilized soil had a high load-bearing capacity. It can be concluded that calcium lignosulfonate may be a good eco-friendly stabilizing agent to enhance the strength properties of clayey soils turning them into appropriate pavement subgrade materials. Keywords: Lignosulfonate; black cotton soil; California bearing ratio test
Fields of Study & Subjects
Geotechnical Engineering and Soil Stabilization
Geotechnical and construction materials studies
Materials Engineering and Processing
Publication details
- Journal / source
- International Journal of Creative and Open Research in Engineering and Management
- Volume
- 02
- Issue
- 03
- Pages
- 1–6
- Publication date
- 30 March 2026
- Language
- EN