FEATURES OF THE NEAR-WELLBORE ZONE TEMPERATURE REGIME DURING HYDRAULIC FRACTURING AND ITS IMPACT ON BREAKER SELECTION

Read full text Summarise with VIRAT
Authors: A. T. Nurtashev
Cited by: 0
References: 7

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

In the development of oil and gas fields with elevated and high formation temperatures, the effectiveness of hydraulic fracturing (HF) operations is largely determined by the correct selection of the breaker system, which ensures controlled degradation of the polysaccharide gel after pumping and proppant placement. In conventional HF design practice, breaker type and concentration are typically selected based on a static formation temperature, while variations in the near-wellbore thermal regime during pumping are only partially considered. This study presents the results of an analysis of formation temperature dynamics recorded in real time using an autonomous downhole pressure–temperature gauge during an HF operation, including the injection test, mini-frac, and main fracturing stages. It was established that injection of fracturing fluid at a surface temperature of approximately 20 °C leads to a rapid reduction of near-wellbore temperature by several tens of degrees relative to the initial formation temperature. Operational pauses result in partial temperature recovery; however, the original thermal state is not restored before subsequent stages. The results demonstrate that the effective temperature governing HF fluid performance during a significant portion of the operation differs substantially from the static formation temperature. This discrepancy affects gel degradation kinetics and the efficiency of persulfate-type oxidative breakers. Comparison of field temperature data with laboratory rheological test results obtained using a Chandler 5550 viscometer confirms the necessity of accounting for dynamic temperature conditions when selecting breaker systems. Incorporating actual thermal history into breaker design improves selection reliability and enhances fracture cleanup efficiency in hightemperature reservoirs.

Fields of Study & Subjects

Hydraulic Fracturing and Reservoir Analysis Drilling and Well Engineering Enhanced Oil Recovery Techniques

Publication details

Journal / source
Herald of Kazakh-British technical university
Volume
23
Issue
1
Pages
385–394
Publication date
29 March 2026
Language
EN