Modeling Random Fiber Networks in Hyperelastic Composites

Read full text Summarise with VIRAT
Authors: Bárbara Minosso, Pietra de Castilhos Lagranha, Rogério José Marczak
Cited by: 0
References: 7

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

The mechanical behavior of elastomers reinforced with random fiber networks (RFNs) depends strongly on the microstructural organization. This work presents a computational approach for generating three-dimensional RFNs using a persistent random walk with orientation via the von Mises-Fisher distribution. The algorithm incorporates curvature control, fiber smoothing, and a self-avoidance criterion with collision detection to avoid fiber overlap. Fiber geometries are generated according to a target volume fraction through an iterative adjustment of the number of fibers and are exported for finite element analysis. The geometries of polyester fiber modeled as linear-elastic REINF264 elements in ANSYS are embedded into a hyperelastic RTV silicone rubber matrix modeled by a two-term Mooney-Rivlin formulation. Fibers were modeled as linear elastic reinforcement elements using REINF264 elements. Seven RVE sizes from 1 mm to 4 mm were tested under uniaxial deformation, and homogenized Cauchy stresses were computed to obtain the second Piola-Kirchhoff stress tensor and the effective material elasticity component C_1111. Results indicate convergence of the elastic response for L=3.5mm, suggesting this as the minimum RVE size for representing the given microstructure.

Fields of Study & Subjects

Composite Material Mechanics Elasticity and Material Modeling Mechanical Behavior of Composites

Publication details

Journal / source
Anais do ... Congresso Ibero-Latino-Americano de Métodos Computacionais em Engenharia
Volume
5
Publication date
18 March 2026
Language
EN