NUMERICAL EVALUATION OF THE STATIC PERFORMANCE OF A SMALL PROPELLER COMPARING TRADITIONAL AND TRANSITIONAL TURBULENCE MODELS

are difficult to predict. The objective of this work is to investigate the use of transition- sensitive models to identify the conditions under which their use is truly necessary, as they are computationally intensive. A 3D-printed propeller, designed from the SDA 1075 airfoil, was tested under static flow conditions on a test bench, with thrust and torque measurements. Fully turbulent models were used in the simulation, and the results were compared with measurements between 2,000 and 8,000 rpm. Consistent results were obtained for Reynolds numbers above 60,000. For Reynolds numbers below 60,000, the results were not very accurate. Therefore, transition-sensitive models capable of capturing laminar separation were used, and consistent results were obtained for Reynolds numbers below 60,000. This was demonstrated by the propeller's aerodynamic coefficients and the images of laminar separation bubbles captured by the simulation.