2025_PE_NR10

Read full text Summarise with VIRAT
Authors: Filip Księżyc
Cited by: 0

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Abstract This dataset contains simulation results used to evaluate the linearity error of output amplitude as a function of input charge for different biasing currents. The data were generated using parametric sweeps of the input signal amplitude and processed with a linearity error evaluation method based on deviation from an ideal linear response. The dataset supports the results presented in Figures 3 and 5. Description of the Data The dataset consists of two CSV files: 1. linerr_fld.csv This file corresponds to Figure 3, which presents the linearity error of output amplitude for selected biasing current values. X-axis (input charge): Column: leafValue(linearityErrorPercentage(swapSweep(vampl "qmax") idealLinearSignalFirstLast(swapSweep(vampl "qmax"))) "ivary" 3e-06) X Y-axis (linearity error, %): 3 × 10-6 A 6 × 10-6 A 12 × 10-6 A 20 × 10-6 A 2. linerr_inv.csv This file corresponds to Figure 5, which presents the linearity error of output amplitude for another set of biasing current values. X-axis (input charge): Column: leafValue(linearityErrorPercentage(swapSweep(vampl "qmax") idealLinearSignalFirstLast(swapSweep(vampl "qmax"))) "ivary" "20u") X Y-axis (linearity error, %): 20 µA 12 µA 6 µA 3 µA Methodology The data were generated through simulation using a parametric sweep of the input signal amplitude (vampl, parameter "qmax"). For each biasing current value (ivary), the output signal was compared with an ideal linear response defined by the first and last points of the sweep (idealLinearSignalFirstLast). The linearity error was calculated using a percentage-based metric (linearityErrorPercentage), representing the deviation of the simulated output amplitude from the ideal linear characteristic. Data Structure Format: CSV (comma-separated values) Each file contains: One column representing input charge (X-axis) Multiple columns representing linearity error values (Y-axis), each corresponding to a specific biasing current Column names reflect the simulation workflow and parameterization. Notes Units of current are expressed in amperes (A) or microamperes (µA). The dataset is intended for reproducibility of figures and validation of simulation results.

Fields of Study & Subjects

Analog and Mixed-Signal Circuit Design Radio Frequency Integrated Circuit Design Low-power high-performance VLSI design

Publication details

Journal / source
Akademia Górniczo-Hutnicza w Krakowie
Publication date
24 March 2026
Language
EN
Document type
Dataset