Предварительная оценка исполнителей инженерно-геологических изысканий в части определения физико-механических свойств грунтов

View at publisher Summarise with VIRAT
Authors: P. Beliaev, А.С. Селютин, Н.Г. Балашова, Н.С. Харьков, Mikhail N. Efimenko, Пащенко Федор Александрович
Cited by: 0
References: 1

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Инженерно-геологические изыскания (ИГИ) являются очень важным источником исходных данных для принятия проектных решений. На основании результатов изысканий проектировщик получает информацию об инженерно-геологических условиях площадки строительства, прежде всего о строении ее грунтового основания, свойствах слагающих ее грунтов, наличии или отсутствии опасных инженерно-геологических процессов, а также другие сведения, необходимые для принятия проектных решений. В комплексе ИГИ в качестве источника количественных исходных данных для геотехнических расчетов особо стоит выделить полевые и лабораторные испытания грунтов. В отношении классификации грунта и определения его характеристик «последнее слово», как правило, остается за лабораторными испытаниями. Достаточно частой на текущий момент проблемой в инженерной практике является некачественное выполнение ИГИ для строительства, вследствие чего проектировщик получает недостаточные или недостоверные исходные данные. Основными причинами снижения качества изысканий являются стремление к экономии средств, некомпетентность исполнителя и изначально нереалистично сжатые сроки выполнения ИГИ при малых производственных мощностях. Для экономии средств и выполнения изысканий в срок зачастую используют сомнительные методы оптимизации труда, основанные на «карандашном» бурении или «нарисованных» результатах испытаний. Последствиями некачественных ИГИ могут быть увеличение стоимости строительных работ или снижение устойчивости зданий и сооружений из-за негативного влияния геологической среды. Лабораторные испытания являются основным и наиболее распространенным источником качественных данных по физико-механическим свойствам грунтов. Поэтому авторы на основе анализа нормативной документации и личного опыта разработали алгоритм предварительной оценки соответствия потенциального исполнителя ИГИ критериям выбора в части лабораторных исследований образцов. Этот алгоритм и представлен в данной статье. Также рассмотрены ключевые аспекты взаимодействия заказчика с лабораторией в процессе выполнения работ. Site investigation (engineering-geological survey) is a very important source of initial data for making design decisions. Based on the investigation data, designers obtain information on the engineering-geological conditions of a construction site, primarily on the structure of its ground base, the properties of the constituent soils and rocks, hazardous engineering-geological processes, as well as other data necessary for making design decisions. As a source of quantitative initial data for geotechnical calculations, field and laboratory testing of soils and rocks should be emphasized within the framework of site investigations. For soil and rock classification and property determination, the “final word” usually belongs to laboratory testing. In modern engineering practice, a common problem is the poor quality of site investigations for construction, resulting in designers receiving insufficient or unreliable initial data. The main reasons for the decline in the investigation quality are cost-cutting, incompetence of contractors, and tight deadlines for site investigations combined with limited instrumentation. To save money and complete investigations on time, questionable labor optimization methods are often used on the basis of fabricated drilling or test results. Poor quality investigations can lead to increased construction costs or decreased stability of buildings and structures caused by the negative impact of the geological environment. Laboratory testing is the primary and most common source of qualitative data on physical and mechanical properties of soils and rocks. So, based on an analysis of regulatory documents and personal experience, the authors have developed an algorithm for a preliminary assessment of the compliance of a potential site investigation contractor with selection criteria regarding laboratory testing of samples. This algorithm is presented in the current article. Some key aspects of the customer-laboratory interaction during the testing are also discussed.

Fields of Study & Subjects

Geotechnical and construction materials studies Geotechnical Engineering and Soil Mechanics Civil and Geotechnical Engineering Research

Publication details

Journal / source
Геоинфо
Volume
7
Issue
4
Pages
44–50
Publication date
30 January 2026
Language
RU