Kompatibilität von Betonzusatzmitteln mit klinkerarmen Bindemitteln – Praxisprobleme und Lösungsansätze
Summary
No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.
Summarise with VIRAT Free to try with your Science Catalogs account.Abstract
Concrete admixtures are a key technology for the production of clinker-reduced concretes. They enable a significant reduction of the water–cement ratio (w/c ratio), thereby allowing a lower binder content and a corresponding reduction in CO2 intensity. However, the use of novel SCMs (supplementary cementitious materials) such as calcined clays poses new challenges for concrete technology. Compared with conventional materials like ground granulated blast-furnace slag or fly ash, these materials exhibit a much higher specific surface area. This leads to an increased demand for superplasticizers and to accelerated loss of workability. Since the latter is closely linked to early hydration kinetics, current research focuses on the precise control of early hydration. In addition to complex rheological behaviour, high clinker substitution levels also require solutions to address the typically low early strength. Modern accelerator technologies are well-suited to optimize the performance of sustainable binder systems, but their full potential has not yet been fully exploited.
Fields of Study & Subjects
Concrete and Cement Materials Research
Concrete Properties and Behavior
Innovative concrete reinforcement materials
Publication details
- Pages
- 53–62
- Publication date
- 1 January 2026
- Language
- EN