Investigating Compressive, Pullout and Tensile Strength of Concrete Containing Polypropylene

Read full text Summarise with VIRAT
Authors: Niaz Md Ashraful Haque, Md Jahidul Islam
Cited by: 0

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Every year a large number of plastic wastes are generated throughout the world which is a major threat to the environment due to its non-biodegradable nature where polypropylene consists of more than 35 percent of the total. These plastics need to be recycled and reused in an environmental friendly way. On the other hand, for construction purposes an alternative of natural stones, whose reserve is depleting, must be sought. Therefore, aim of this study is to investigate the compressive, tensile and pull-out strength of concrete partially mixed with recycled waste polypropylene (PP) plastic as coarse aggregate. In order to evaluate the strength of concrete, twelve different mixes are considered where stone chips are replaced by PP at 10% and 20% (by volume) with four different water-cement ratios (0.35 and 0.4 with admixture; 0.45 and 0.5 without admixture) and compared with concrete with no PP aggregate. At 90 days, for concrete with 10% PP replacement compressive strength reduction was between 4% and 26%; whereas, tensile strength decreased from 7% to 11%. The results of pull out strength reveals that concrete with 10% PP replacement have higher pull out stress except for concrete with 0.35 w/c ratio. Finally, the use of 10% PP in concrete is safe and can generate strong structural elements.

Fields of Study & Subjects

Recycled Aggregate Concrete Performance Innovative concrete reinforcement materials Materials Engineering and Processing

Publication details

Journal / source
Figshare
Publication date
1 January 2026
Language
EN