High-Loading Waste-Derived Fillers in Poly (Vinylidene Fluoride) Composites: Comparative Effects of Alum Sludge and Wood Dust on Mechanical, Thermal and Dielectric Properties
Summary
No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.
Summarise with VIRAT Free to try with your Science Catalogs account.Abstract
Poly (vinylidene fluoride) (PVDF) composites with high loadings (50-65 wt%) of waste-derived fillers—alum sludge (AS), an inorganic water treatment residue, and wood dust (WD), a lignocellulosic timber by-product—were prepared via melt compounding and compression moulding without compatibilisers. Mechanical, thermal, and dielectric properties were systematically characterised. Increasing filler loading enhanced Young’s modulus but reduced elongation and impact resistance due to restricted chain mobility and stress concentration. Dielectric behaviour differed markedly between the two systems: AS composites exhibited progressive increases in relative permittivity (up to ~70%) attributed to interfacial polarisation, whereas WD composites showed only modest changes due to the low dielectric contrast of lignocellulosic fillers. Differential scanning calorimetry revealed reduced PVDF crystallinity in composites, indicating hindered crystal formation at high filler concentrations. Overall, PVDF can accommodate substantial waste-derived filler fractions while maintaining processability and functional dielectric performance, offering a sustainable pathway for valorising industrial and biomass residues in dielectric materials.
Fields of Study & Subjects
Dielectric materials and actuators
Polymer crystallization and properties
Polymer Science and Applications
Publication details
- Journal / source
- Journal of Advanced Electronic Materials
- Volume
- 2
- Issue
- 1
- Pages
- 25–37
- Publication date
- 28 March 2026
- Language
- EN