Reliability Enhancement of an 11kV Distribution Network Using Optimally Placed Hybrid Distributed Generation

Read full text Summarise with VIRAT
Authors: O. S Digbani, Sepiribo Lucky Braide, Igbogidi O. N.
Cited by: 0
References: 14

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

This paper presents a comprehensive techno‑analytical investigation into the impact of optimally placed hybrid distributed generation (DG) on the reliability performance of a medium‑voltage distribution network. A practical 11‑kV radial feeder in Edo State, Nigeria, supplying 2.01 MW of connected load, was used as the case study. In the base‑case condition, load‑flow and reliability analysis in ETAP yielded minimum bus voltages of 0.912 pu, total real power losses of 186.4 kW, and poor reliability indices of SAIFI = 13.58 interruptions/customer‑year, SAIDI = 49.35 hours/customer‑year, CAIDI = 3.63 hours/interruption and EENS = 314.74 MWh/year. Using a Genetic Algorithm implemented in MATLAB, two hybrid solar–wind DG units of optimal capacities 480 kW and 350 kW were allocated at Bus 9 and Bus 12, respectively. After DG integration, the minimum bus voltage improved to 0.981 pu, real power losses reduced to 74.2 kW (60.2% reduction), and reliability indices improved to SAIFI = 6.60 interruptions/customer‑year, SAIDI = 40.01 hours/customer‑year, CAIDI = 6.06 hours/interruption and EENS = 71.98 MWh/year, corresponding to a 77.1% reduction in energy not supplied. The results demonstrate that optimally placed hybrid renewable DG provides an effective technical solution for enhancing voltage stability, reducing losses and significantly improving service continuity in weak radial distribution networks.

Fields of Study & Subjects

Optimal Power Flow Distribution Power System Reliability and Maintenance Microgrid Control and Optimization

Publication details

Journal / source
Iconic Research and Engineering Journals
Volume
9
Issue
9
Publication date
31 March 2026
Language
EN