Comparative study of cement-rice husk ash stabilized bricks and fired clay bricks

Read full text Summarise with VIRAT
Authors: Daniel R Samson, Emmanuel Safari Leo
Cited by: 0

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

In some countries, fired clay bricks (FCBs) are widely used for construction, but their production is energy-intensive, relies largely on firewood, and contributes to deforestation and carbon emissions. This study explores unfired clay bricks stabilised with cement and rice husk ash (RHA) as a sustainable alternative, using Dakawa ward in the Morogoro Region, Tanzania, as a case study. The bricks, with a clay of plasticity index 17%, were stabilized with 6%, 10%, and 14% cement by mass, moulded into 40 mm cubes, and cured for 28 days. The compressive strengths achieved were 1.5, 3.6, and 4.1 MPa with water absorption values of 9.8%, 11.1%, and 15.2%, respectively. The FCBs of the same size had a compressive strength of about 3.2 MPa but a high water absorption of 20.2%. The results show that approximately 10% cement stabilisation is sufficient to produce better-performing bricks than FCBs. To minimise cement use, RHA was introduced by partially replacing cement at ratios of 20:80, 35:65, and 50:50 (total binder: 10%). After curing, compressive strengths of 3.6, 3.3, and 2.5 MPa were achieved, with corresponding water absorption values of 11.4%, 13.5%, and 17.0%. These results indicate that cement-RHA stabilisation can reduce cement use while maintaining a performance comparable to FCBs.

Fields of Study & Subjects

Hygrothermal properties of building materials Recycling and utilization of industrial and municipal waste in materials production Concrete and Cement Materials Research

Publication details

Journal / source
Tanzania Journal of Science
Volume
52
Issue
1
Publication date
20 March 2026
Language
EN