Peculiarities of structure formation of blended gypsum-cement-pozzolan binders

View at publisher Summarise with VIRAT
Authors: Borislav Simonov
Cited by: 0

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Gypsum-cement-pozzolan binders (GCPB) offer the potential to reduce the environmental footprint of construction, particularly through the use of recycled gypsum obtained from construction waste. GCPBs are characterised by rapid setting and hardening, as well as increased water resistance compared to gypsum compositions. The structure formation processes in GCPBs exhibit several specific features and the use of recycled gypsum may introduce additional particularities. The present study aims to investigate the behavior of GCPBs with improved properties, in which the gypsum component is recycled from gypsum plasterboard waste, the cement content does not exceed 35 %, and natural zeolite, used as a pozzolanic additive, is applied without any additional processing. The research focuses on the structure formation process, strength development kinetics, and water resistance of two binder compositions with different cement-to-zeolite ratios (1:1 and 1:0,6), cured under both air-dry and underwater conditions. Standardized testing methods for binders were employed, complemented by X-ray diffraction (XRD) and differential thermal analysis (DTA). The results indicate that the structure formation and system stability depend strongly on both the composition and curing conditions. It has been established that the process of structure formation depends on the composition and aging conditions: the 1:1 ratio of cement and zeolite is more favorable for achieving stability of the system over time even under water and leads to higher strength (up to 30 MPa). Based on the construction and technical indicators of the research compositions, gypsum-cement-pozzolan binders based on recycled gypsum can be used without restrictions in environments with increased humidity for plaster and masonry mortars, masonry units and thin-walled composite elements.

Fields of Study & Subjects

Concrete and Cement Materials Research Recycling and utilization of industrial and municipal waste in materials production Recycled Aggregate Concrete Performance

Publication details

Journal / source
ANNUAL OF Univercity of architecture civil engineering and geodesy
Volume
59
Issue
1
Pages
169–180
Publication date
25 March 2026
Language
EN