Coordinating smart hybrid distribution transformers to support local clean energy systems

Read full text Summarise with VIRAT
Authors: Hayward, Samuel
Cited by: 0

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Hybrid Transformers (HT) are an emerging volt/VAR control technology that can offer major benefits to distribution networks, such as mitigating the power quality issues caused by renewable distributed generation. Furthermore, compared to competing technologies such as On-Load Tap Changer transformers and/or Solid-State Transformers, HTs offer a balance between control, reliability, and cost, making them an ideal addition to distribution networks. HTs are a combination of a conventional transformer and partially-rated power electronic converters. The addition of power electronics provides HTs with control capabilities such as dynamic voltage regulation (accomplished through the injection of compensating voltage) and reactive power compensation. Prior work on HTs has focused on the modelling, simulation, and/or testing of individual HT units. There has been little work relating to the coordination of multiple HTs in the same network. Furthermore, previous work relating to the coordination of multiple HTs has only considered the reactive power compensation capabilities of HTs, and not the voltage compensation capabilities. As such, there is an absence of coordination methods for multiple HTs considering both the voltage regulation and reactive power compensation capabilities of HTs. This is due to the highly nonlinear characteristics of the voltage regulation capability of HTs, which makes it difficult for it to be formulated as part of computationally tractable optimisation strategies. Coordination methods that can exploit both the voltage regulation and reactive power compensation capabilities of HTs would offer a better demonstration of the benefits and value of HTs, which may help encourage the implementation of HTs into distribution networks, thereby allowing for greater implementation of renewable DG into distribution networks as well. This thesis makes two main novel contributions to help fill this research gap. The first contribution is a coordination method for multiple HTs in the same distribution network, which exploits both the HTs’ voltage regulation and reactive power compensation capabilities. The strategy employed for the first contribution was a single-period Sequential Linear Programming (SLP) method with the objective of maximising the active power output of DGs in a distribution network. The second contribution was a method for determining the optimal location for HTs to be installed. The strategy employed for the second contribution was a multi-period SLP method with the objective of maximising the Net Present Value (NPV) earned from exporting excess DG active power over the operational lifespan of the HTs. For both contributions, the voltage regulation and reactive power compensation capabilities of HTs are modelled through the use of HT Power Injection Models, which capture the HT control capabilities through controlled power injections. The major challenge for both contributions was to successfully implement the volt/VAR control capabilities of HTs into optimisation strategies in a manner that was computationally tractable while also maintaining a satisfactory level of accuracy. Case study results for both contributions show that optimal HT coordination can offer significant benefits. For the first contribution, optimal HT coordination allowed for noticeable increases in DG active power output, with case studies carried out in modified versions of the IEEE 69- Bus system and European Low Voltage (EULV) test feeder. In these case studies, HTs were utilised to prevent over-voltage violations that would have occurred due to increasing the DG active power output. The largest increase in DG output amongst the results occurred in the 69- Bus system with a 30.43% increase. For the second contribution, HT optimal placement and coordination allowed for positive NPVs to be earned, demonstrating significant improvement to income earned from exporting excess active power due to the investment into HTs. For the second contribution, a case study was carried out in a combination of the CIGRE European LV distribution network benchmark and 2 other LV network benchmarks. The largest NPV earned being £6.56 million, resulting from a 45.53% increase in estimated annual profits from DG active power exports. Results for both contributions also demonstrate that the proposed SLP methods are successful in accommodating the nonlinear characteristics and capabilities of HTs while maintaining a satisfactory level of accuracy.

Fields of Study & Subjects

Optimal Power Flow Distribution Microgrid Control and Optimization Power Quality and Harmonics

Publication details

Journal / source
ERA
Publication date
31 March 2026
Language
EN
Document type
Thesis