The Effects of Mould Materials on the Mechanical Properties of Aluminium Casting

Read full text Summarise with VIRAT
Authors: Bankole A.S, V. O. Hammed, T. L. Akpomejero, Moshood Dehinde Shittu
Cited by: 0

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Centrifugal casting is a manufacturing process used to form cylindrical components with a central axis of rotatio. In continuous casting process, molten metal flows into the continuous casting mould, cools by cold water, and pulls out after solidification. In this research work, the effects of mold materials on mechanical properties of aluminium were investigated. Mould materials were prepared from sand, metal, and plaster of paris (POP). A steel rod of about 25mm in diameter was used as pattern to cast aluminium in these three mould materials. Test pieces were machined from the casting produced by each of the three mould materials for tensile, hardness and impact tests, as well as microstructure. It was observed from the tests that aluminium cast by sand has the highest value of ductility at the expense of its hardness, while those castings by metal and POP moulds have appreciable increase in hardness values but lesser values of ductility. The question as to which of the mould materials is the best depends on the engineering application requirements; sand mould would be preferred where ductility is the major requirement, while metal and POP moulds might be preferred when hardness is the priority.

Fields of Study & Subjects

Aluminum Alloy Microstructure Properties Metallurgical Processes and Thermodynamics Diverse Industrial Engineering Technologies

Publication details

Journal / source
Asian Journal of Advanced Research and Reports
Volume
20
Issue
3
Pages
288–299
Publication date
28 March 2026
Language
EN