Numerical assessment of electrolyte flow distribution through flow-engineered 3-D printed bi-layer electrodes for alkaline water electrolysis

Read full text Summarise with VIRAT
Authors: Kevin Van Droogenbroek, Xavier Pinon, Ahmed Aissa Berraies, Benoît Scheid, Joris Proost, Hydrogen Days 2026
Cited by: 0

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

The use of porous electrodes within zero-gap cell configurations for alkaline water electrolysis has gained popularity over the past years. Even though these 3-D electrodes present an increased hydrogen production rate thanks to their high available surface area, bubble evacuation remains a challenge, as bubbles are trapped within the intricate porous structure of the electrodes. Recent studies in our group have shown that current densities of 2 A·cm-2 can be reached at cell voltages lower than 2 V when using flow-engineered laterally-graded bi-layer foam electrodes with forced electrolyte flow [1]. This performance improvement arises from the electrode design, which promotes efficient bubble removal and thereby reduces the Ohmic resistance. In this work, the bi-layer foams are compared to 3-D printed bi-layer geometries with so-called triply periodic minimal surfaces (TPMS) [2]. The latter are defined based on a mathematical expression involving void fraction and a lattice parameter. In a first approach, two so-called Schwarz CLP structures are combined with lattice parameters matching the pore sizes of the previously used 450 µm foam (catalytic layer) and 3000 µm foam (porous transport layer - PTL). Computational fluid dynamics (CFD) simulations are combined with experimental data to correlate the electrolyte flow characteristics of various bi-layer structures with their electrochemical performance. In particular, single-phase electrolyte flow (30 wt% KOH solution at 80°C) through explicitly defined 3-D electrode geometries has been simulated using OpenFOAM. Postprocessing allows extraction of specific velocity components, in particular the lateral y-velocity, which describes electrolyte transfer away from the diaphragm, i.e. from the catalytic layer to the PTL. As illustrated in Figure 1 below, the lateral velocity profiles differ markedly between the bi-layer foam and the bi-layer TPMS. The bi-layer foam exhibits a pronounced inlet effect, whereas the bi-layer TPMS provides a steadier and more uniform transfer towards the PTL as the electrolyte penetrates upwards through the electrode. This first 3-D printed bi-layer TPMS already achieves a performance comparable to that of the optimised bi-layer foam electrode. Importantly, TPMS structures offer far greater design flexibility. Indeed, by tuning parameters such as channel orientation, lattice size and porosity through 3-D printing, the velocity fields – and consequently bubble removal and overall cell efficiency – can be precisely tailored. We then believe that TPMS structures can overcome the current bi-layer foam in terms of performance.

Fields of Study & Subjects

Fuel Cells and Related Materials Electrocatalysts for Energy Conversion Heat and Mass Transfer in Porous Media

Publication details

Journal / source
Digital Access to Libraries (Université catholique de Louvain (UCL), l'Université de Namur (UNamur) and the Université Saint-Louis (USL-B))
Publication date
1 January 2026
Language
EN