Valorizing underutilized canola crop residue for fibres and polymer composites: closed-loop retting, enzymatic degradation, and structure–processing–properties relationships

Summarise with VIRAT
Authors: Md Shadhin
Cited by: 0

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

The use of canola fibres, obtained from discarded stalks, in textiles and composites is limited due to insufficient knowledge of sustainable fibre extraction technologies, processing chemistry, and structure-processing-properties relationships. The objectives of this study were to: (i) develop a closed-loop water-retting system and optimise retting parameters; (ii) integrate water or field-retting with mechanical decortication to establish a scalable extraction process, and conduct enzymatic post-treatment on canola fibres following water-retting and decortication to understand the kinetics of catalytic degradation and optimise processing conditions; (iii) investigate the effect of fibre processing method and fibre geometry on the properties of nonwoven mats and composites. Water-retted and hand-extracted canola fibres exhibited 10.7±0.3 % fibre yield under optimal retting conditions. The fibre crystallinity index increased, while the linear density decreased with increasing retting time, temperature, and water flow rate. Canola fibres obtained through mechanical decortication following water or field-retting exhibited greater fibre length and marginally lower fibre diameter compared to hand-extracted fibres. The rate of change in pectin concentration determined the degree of fibre degradation during enzymatic treatment with pectinase, conducted on water-retted and decorticated fibres. The fibre degradation process exhibited a rapid initial decay due to higher starting pectin concentration, followed by a progressive slowdown of degradation rate in the remaining phase due to depletion of pectin within the fibres. Unlike pectinase, pectate lyase exhibited substantial differences in degradation effectiveness across various crop varieties. Enzymatic pectinase post-treatment on canola fibres after water-retting and decortication resulted in approximately 87% reduction in fibre diameter and about 80% reduction in linear density, leading to significant improvements in fibre flexibility (∼1148%) and tensile modulus and strength (~94%). For a given fibre length, composites manufactured from water-retted-decorticated (WRD) fibres exhibited the lowest modulus and strength, while those manufactured from WRD-enzyme treated fibres showed the highest. Composites manufactured from field-retted-decorticated fibre fell in between, primarily owing to variations in fibre modulus and consolidation behaviour in that order, which were caused by the differences in fibre chemical composition and diameter resulting from fibre processing and needle punching.

Fields of Study & Subjects

Natural Fiber Reinforced Composites Dyeing and Modifying Textile Fibers Textile materials and evaluations

Publication details

Journal / source
Mspace (University of Manitoba)
Publication date
16 March 2026
Language
EN