Domestic hot water control analysis & pathways for future development

Read full text Summarise with VIRAT
Authors: Severi Hiltunen
Cited by: 0
References: 7

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Hot domestic water is available in virtually every apartment-and commercial building.Wherever available, district heat is a very common source of energy for water heating.Building automation systems that control the domestic hot water process among other things have grown very sophisticated.A modern building automation system has access to wide range of measurements and other data from inside and outside of the building, and the computing power to utilize it.Water heating control itself, however, has not changed much.The process is usually controlled by a regular PI-controller.Modern equipment makes it possible to implement new technologies to both control and the whole building automation system.Factors such as tightening regulations around energy efficiency, district heat generation pivoting to green energy, and the capabilities of modern building automation systems were all found to incentivize the improvement of heating control and the systems around it.Data was gathered from building automation systems around Finland.Measurements from a single district heating grid were analyzed and compared between two separate buildings on the same grid.Control results of current domestic hot water control across many buildings were analyzed and the issues found were explored.Seasonal changes in the district heating grid and their effect on the system dynamics were found to be unaccounted for in control and thus influence the control result.Control results were found to be satisfactory in general, but hardware issues and controller tuning errors were also observed.After data analysis, eight pathways for improvement were identified.The most straightforward improvement identified was the utilization of already measured variables such as district heating grid temperature in control.Another important finding was that with sufficiently accurate data, modeling and simulating domestic hot water systems from data without physics calculations looks promising.An initial simulator concept was developed and successfully tested with placeholder dynamics.Current data collection capabilities were found to be inadequate to capture the system dynamics.A proposal for building an automation system data collection module that would allow easier and more efficient logging for control development and other purposes was then devised.The importance of high-resolution water consumption metering for research and development purposes was also highlighted.

Fields of Study & Subjects

Building Energy and Comfort Optimization Integrated Energy Systems Optimization Building energy efficiency and sustainability

Publication details

Journal / source
Tampere University Institutional Repository (Tampere University)
Publication date
1 January 2026
Language
EN
Document type
Thesis