Abstract
The textile industry has transitioned significantly, moving beyond traditional clothing and garments toward the development of smart electronic textiles that integrate cutting-edge materials, technologies, and functionalities. Looking ahead, the development of wearable electronics will center on multifunctional, user-friendly systems that prioritize comfort and user acceptance, driven by the advancement of electronic textile platforms. This work focuses specifically on electrical heating textiles (EHTs), which are widely used to enhance thermal insulation in cold-weather gear,such as protective clothing, outdoor blankets, and sleeping bags. Traditionally, EHTs are manufactured by integrating metal nanoparticles into the fabric surface or by weaving in conductive copper or silver wires. However, these methods come with significant drawbacks. For instance, metal wires can compromise fabric flexibility and comfort and are prone to breakage under repeated movements. Similarly, metal nanoparticles are vulnerable to mechanical wear through rubbing, abrasion, or washing. To address these issues, conductive inks formulated with carbon-based materials such as graphene and carbon nanotubes, combined with appropriate polymeric binders, offer a promising alternative. This doctoral thesis investigates the formulation of conductive inks composed of carbon-based fillers combined with either synthetic or bio-based polymeric binders. These inks were characterized and subsequently applied onto cellulose-based textile substrates (cotton and viscose) using various coating methods, including filtration, dip-coating, airbrush spraying, and knife-coating, to fabricate multifunctional conductive textiles. The influence of the coating technique, binder type, and filler selection on the performance of the coated fabrics was systematically examined. Specifically, the Joule heating performance in the different coating ink formulation setups was evaluated with bio-based binders, ethyl cellulose, and a commercially available bio-binder. In this regard, the combination of multi-walled carbon nanotubes (MWCNTs) with the commercially available bio-binder yielded the highest electrical conductivity and Joule heating performance. Comparative studies with synthetic binders, particularly polyurethane (PU), revealed that while bio based coatings delivered superior electrical performance, they exhibited lower durability underwashing and abrasion. To address the low durability of bio-based coatings, a hybrid sandwich coating approach was developed by layering synthetic and bio-based inks. This sandwich configuration successfully optimized the conductivity and durability, offering a synergistic balance between performance and sustainability. Furthermore, the impact of environmental factors, such as relative humidity and ambient temperature, on the heating efficiency was assessed to better reflect real-world operating conditions for Joule heating textiles. Finally, the potential of integrating temperature sensing into EHTs was investigated to promote the capabilities that enable real-time monitoring and thermal feedback control. Overall, this work advances the design of conductive textiles by providing scalable fabrication strategies, performance insights, and innovative approaches tailored to wearable electronics and smart electrical heating clothing applications. The findings contribute to the emerging field of sustainable e-textiles by integrating circular material principles with high functional performance.