Ravinteiden annostelun optimointi paperitehtaan jätevedenpuhdistamolla online-COD-analysaattorin avulla

Read full text Summarise with VIRAT
Authors: Emma Tennosmaa
Cited by: 0
References: 18

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

The objective of this thesis was to optimize nutrient dosing using the online COD analyser installed in the primary clarifier effluent. The aim was to identify a specific COD:N:P ratio that would allow the determination of the required nutrient dosing rates. Another objective was to evaluate how frequently nutrient dosing adjustments should be made. The literature review presents the processes of mechanical pulp production and papermaking, followed by a description of the typical characteristics of wastewater generated from these processes. In addition, the operation of the activated sludge process is outlined. The section concludes with a review of the environmental impacts of pulp and paper production as well as the relevant legislation. The experimental part examines the current dosing practices at the mill and the overall nutrient balance. It also includes the investigation of the COD:N:P ratio tested during the trial period, the results obtained, and the conclusions drawn from the study. In this experimental section, the tested COD:N:P ratio appeared to function well at the mill’s wastewater treatment plant. The trial run was interrupted and ultimately lasted only ten days due to a malfunction of the online COD analyser. During this 10-day trial, the measurements remained within the reference ranges, indicating the functionality of the ratio. It is recommended to conduct a longer trial run using the same ratio to fully verify its effectiveness.

Fields of Study & Subjects

Wastewater Treatment and Nitrogen Removal Water Quality Monitoring and Analysis Wastewater Treatment and Reuse

Publication details

Journal / source
LUTPub (LUT University)
Publication date
1 January 2026
Language
EN
Document type
Thesis