Ultraäänihitsaus suuripoikkipinta-alaisten kuparijohtimien ja -liittimien liittämisessä : prosessin toteutettavuus ja mikrorakenteen arviointi

Read full text Summarise with VIRAT
Authors: Taru Keihänen
Cited by: 0
References: 15

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

This thesis investigates the applicability of ultrasonic welding for joining large-cross-sectional copper conductors and terminals, focusing on the influence of key process parameters (weld force, energy input, amplitude, and weld time) on joint quality. The effects of surface pretreatment and metallurgical phenomena on weld formation were also examined. Experimental welding trials were conducted using 70 mm² and 95 mm² copper conductors. Tensile strength and voltage drop measurements, supported by metallographic cross-section analysis, were used to evaluate joint performance. Optimized parameters produced mechanically robust joints, with tensile strengths exceeding the base material in several cases and voltage losses remaining below 1 mV. Metallographic examination revealed plastic deformation and partial recrystallization without evidence of melting, although localised porosity and incomplete bonding were observed in some samples. Surface preparation showed inconsistent effects on tensile strength and electrical performance, suggesting that the as-received material surfaces were already suitable for welding. The study confirms ultrasonic welding as a viable method for joining large copper conductors when parameters are carefully optimized. Further research is recommended to evaluate long-term durability, fatigue behavior, and the influence of different welding systems and tooling.

Fields of Study & Subjects

Advanced Welding Techniques Analysis Welding Techniques and Residual Stresses Electronic Packaging and Soldering Technologies

Publication details

Journal / source
LUTPub (LUT University)
Publication date
1 January 2026
Language
EN
Document type
Thesis