Evaluation of roof-level ventilation potential of the urban canopy layer : Experimental and numerical investigations

Read full text Summarise with VIRAT
Authors: Yuanyuan Lin
Cited by: 0

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Urban densification increases aerodynamic resistance to incoming rural winds and suppresses channeling flow within street networks. The resulting weakening of advective ventilation raises concerns about pollutant removal across the roof level between the urban canopy layer and the overlying atmosphere. This study investigates how urban morphology influences total aerodynamic resistance and the mechanisms governing roof-level air exchange through windtunnel experiments and computational fluid dynamics (CFD) simulations. Idealized models were adopted to enable generalizable insights. An idealized urban neighborhood with discretely arranged building blocks was first examined. Based on total drag force (Fd), the highest aerodynamic resistance occurred at moderate plan area density (λp ~0.25), while spanwise repeated arrays exhibited decreasing Fd with increasing λp over 0.11–0.56. At fixed λp, layouts, allowing more direct flow impingement on windward façades produced larger Fd. Poorly ventilated hotspots were mainly associated with recirculation in building near wakes, typical of wake-interference and isolated roughness regimes. Increased geometric contrast between adjacent buildings enhanced vertical transport across the canopy–roof interface, although local ventilation remained spatially heterogeneous. A worst-case scenario without channeling flow was analyzed using quasi two-dimensional street canyons and isolated semi-enclosed cavities, with emphasis on fluctuating components of ventilation. Under skimming flow, air exchange was dominated by a mixing layer across the opening, yielding nondimensional ventilation rates (Q*) of 0.02–0.03. Vertically stacked multi-vortex structures inhibited internal mixing and significantly reduced ventilation efficiency, whereas geometry-induced flow perturbations generally enhanced roof-level exchange. Three rooftop flow regimes were identified: recirculation zone, flow attachment, and conical vortex. When recirculation dominates, ventilation resembles shear-driven lateral exchange. Whether direct mean-flow advection occurs depends on the opening’s position relative to the flow reattachment point. Under oblique inflow, conical vortices over a rectangular prism markedly increased ventilation through strong suction and elevated turbulence. Turbulence intensity in the approaching flow further modified separation behavior and ventilation efficiency. Overall, the study demonstrates that building-induced turbulence plays a central role in roof-level ventilation and that idealized models provide generalizable insights into how urban morphology governs air exchange in dense urban environments.

Fields of Study & Subjects

Wind and Air Flow Studies Urban Heat Island Mitigation Urban Design and Spatial Analysis

Publication details

Journal / source
DiVA (University of Gävle)
Publication date
1 January 2026
Language
EN
Document type
Thesis