Development of nanoporous polymer electrolytes for lithium metal batteries

Read full text Summarise with VIRAT
Authors: A Zagoury, A-A Ka, Karim Aissou, Jean-Marc Zanotti, Didier Gigmès, Trang N. T. Phan
Cited by: 0
References: 3

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Separators used in lithium batteries (LiBs) physically separate the electrodes to prevent short circuits, while allowing lithium ions (Li+) to move freely through the pores of the separators. As a critical component of LiBs, separators directly impact battery performance. Macroporous polyolefin-based membranes have been widely used as separators in LiBs due to their mechanical strength and adequate electrochemical stability. However, these separators suffer from inherent limitations, such as poor wettability, low liquid electrolyte loading as well as low thermal stability. Poor electrolytes wettability and absorption hinder Li+ transport, degrading battery performance during charge and discharge cycles. In addition, the low thermal stability of polyolefin separators increases the risk of internal short circuits at high temperatures, raising significant safety concerns1.On the other hand, confining liquid electrolytes or poly(ethhylene oxide)/Li salt electrolytes within nanoporous membranes enhanced both ionic conductivity and cycling performance2,3. However, the pore wall chemistry and the pores density of the reported nanoporous membranes cannot be easily modulated. In the present work, we propose an innovative approach based on the self-assembly of block copolymers (BCPs) to fabricate porous polymer electrolyte membranes with oriented nanometric cylindrical pores perpendicular to the electrodes. This approach provides a versatile platform for tailoring the size and geometry of nanopores at large-scale as well as enabling selective functionalization of voided channels. The BCPs used in this work consist of a sacrificial block – polyethylene oxide (PEO) – and a matrix block, that is a random copolymer of styrene and isoprene: poly(styrene-r-isoprene) (PSI) (Fig. 1A). These BCPs were synthesized via nitroxide-mediated polymerization to achieve low dispersity (Ð

Fields of Study & Subjects

Advanced Battery Materials and Technologies Advancements in Battery Materials Block Copolymer Self-Assembly

Publication details

Journal / source
HAL
Publication date
20 May 2026
Language
EN