THERMAL ENVIRONMENT MODELLING, OPTIMIZATION AND ECONOMIC FEASIBILITY ANALYSIS OF A DOUBLE-ROOF CHINESE SOLAR GREENHOUSE IN THE CANADIAN PRAIRIES

Summarise with VIRAT
Authors: Emmanuel Ezechinyelu
Cited by: 0

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

In the Canadian Prairies, supplemental heating greatly increases capital and operating costs of conventional greenhouses, whereas in northern China double-roof Chinese solar greenhouses (DRCSG) allow year-round vegetable production without supplemental heating. Thermal environment simulation models are important in evaluating thermal performance, supplemental heating requirements, and energy-efficient design of greenhouses based on local climatic conditions. A thermal environment model was developed using computational fluid dynamics (CFD) to simulate indoor thermal environment and the heat transfer processes within a DRCSG. The CFD model predicted the hourly indoor temperature variations within the DRCSG based on the input ambient weather data of the greenhouse location and thermal properties of greenhouse building materials. The performance of the CFD model was validated with measured data from a DRCSG located in Olds, Alberta, Canada, and the predicted indoor environmental parameters matched closely with experimental measurements with the largest error occurring for the daytime data due to the estimated ventilation rate. An analytical model of the DRCSG was developed based on heat and mass balance considering the thermal properties of the building materials and crop evapotranspiration within the greenhouse and was used to predict the supplemental heating requirements during extreme cold weather conditions. The analytical model was considered because of its simplicity, but many assumptions must be made leading some heat transfer processes of the DRCSG being neglected. The developed CFD model was also used to predict hourly supplemental heating requirements for four consecutive coldest days (4CCD) in the year based on typical meteorological year data (TMYD) of Olds, Alberta, Canada. Comparative analysis of the predicted supplemental heating requirements from both models revealed that the analytical model overestimates the supplemental heating requirements as the outdoor air must be heated up to the indoor air temperature setpoint, the temperature difference is high, and the heat storage and release processes of the north wall are neglected. In contrast, the numerical model considers the entire thermal processes within the DRCSG including the heat storage and release processes of the north wall which maintain the indoor air temperature above the outdoor air temperature the resulting in more realistic and accurate heating requirements. The CFD model was used to evaluate important building parameters of the DRCSG including span, ridge height, north wall height, and north roof horizontal projection by varying one parameter at a time and proportionally scaling all parameters to determine the combinations with optimal thermal performance. The results indicate that varying one parameter at a time produces minimal difference in the thermal performance indicators and the span, ridge height and north wall height are the major building parameters affecting the thermal performance of the DRCSG. Finally, an economic feasibility analysis of the DRCSG was conducted for year-round vegetable (tomato) production in the Canadian Prairies. The study revealed that the DRCSG vegetable production project is economically feasible in the Canadian Prairies with a simple payback period of 3.91 years and the net present value is sensitive to discount rate, produce price and crop failure rate.

Fields of Study & Subjects

Greenhouse Technology and Climate Control Solar Energy Systems and Technologies Building Energy and Comfort Optimization

Publication details

Journal / source
HARVEST (University of Saskatchewan)
Publication date
1 January 2026
Language
EN
Document type
Thesis