The design journey of mWATTBAT: the open-source radar chip

Read full text Summarise with VIRAT
Authors: Ghaith Al Sabagh
Cited by: 0

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

This thesis presents the complete design and implementation of a D band FMCW radar integrated circuit using the open-source IHP SG13G2 BiCMOS process design kit. The objective is to demonstrate the capabilities of the toolchain for developing a fully integrated radio frequency system on chip from the ground up and provide practical workarounds to overcome the gaps in the process design kit in order to reach design goals. The implemented chip comprises an LO signal frequency multiplication chain, including a ×5 frequency multiplier from 10 GHz to 50 GHz, a 50 GHz amplifier, a ×3 frequency multiplier from 50 GHz to 150 GHz, and a 150 GHz amplifier. The 150 GHz signal is then split into two paths by a differential Wilkinson divider. The first path drives a power amplifier followed by a transmit patch antenna, while the second path provides the LO feed for the mixer. The receiver uses an identical antenna feeding a low-noise amplifier followed by the mixer’s RF input. The mixer outputs a lowfrequency differential IF signal, which can optionally be amplified on-chip using an integrated amplifier. The result of this thesis is a 2-by-1 mm2 chip, which operates of a single-ended LO input signal from 9.5 GHz to 10.5 GHz, which can also be ramped for FMCW operation. The transmit chain achieves a simulated effective isotropic radiated power greater than 0 dBm in the range 142.5 GHz–157.5 GHz, and reaches a peak of 9 dBm at 150 GHz. The receiver chain has an estimated noise figure of 5.7 dB, enabling high sensitivity that corresponds to a maximum range of 1.5 m. The simulated power consumption of the chip is 250 mW. During the course of this work, several contributions were made to the open-source community by reporting limitations and bugs in the utilized process design kit through GitHub issues [1]. A presentation on the chip was also given at the 2025 Free Silicon Conference (FSiC 2025) [2]. In addition, a conference paper describing the design was published in the proceedings of Austrochip 2025 [3]. Furthermore, the chip was submitted to a free tape-out run organized by IHP (TO_July2025) and was accepted for fabrication [4].

Fields of Study & Subjects

Radio Frequency Integrated Circuit Design Radar Systems and Signal Processing Advancements in PLL and VCO Technologies

Publication details

Journal / source
University Library Linz repository (Johannes Kepler Universitat Linz)
Publication date
1 January 2026
Language
EN
Document type
Thesis