Three-stacked pseudo-differential structure with magnetically coupled matching network

Summarise with VIRAT
Authors: Xiaojie Zhang
Cited by: 0

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

This dissertation proposes a design scheme for FR3 frequency band power amplifier based on three pseudo-stacked structure and magnetic coupling matching network. The scheme adopts a transistor stacking structure to improve the voltage tolerance and output power potential of the circuit, so that it can operate stably in a wide power supply voltage range of 2.5 V to 4.5 V. Therefore, the proposed power amplifier meets the requirements of broadband operation, high output power and wide power adaptability. In addition, this structure reduces the limitation of the impedance transformation ratio and creates favorable conditions for the realization of broadband performance. For input and output matching, a combination of symmetric and asymmetric magnetic coupling resonator topologies is adopted. Using its broadband characteristics, this method achieves impedance matching with low loss and flat gain. Finally, the simulation results show that in the target frequency band and the wide power supply voltage range of 2.5 V to 4.5 V, the small signal gain of the power amplifier exceeds 15 dB, the bandwidth of 3 dB covers the entire frequency band, and the input return loss is better than -10 dB. When working at a 4.5 V power supply voltage, its saturated output power reaches 29.8 decibel milliwatts, the peak additional efficiency is 35%, and the output power of 1 decibel compression point is 25.1dBm, showing excellent overall output capacity, efficiency and linearity. This research provides a detailed design process for broadband high-voltage power amplifiers for 6G communication.

Fields of Study & Subjects

Advanced Power Amplifier Design Radio Frequency Integrated Circuit Design Analog and Mixed-Signal Circuit Design

Publication details

Journal / source
DR-NTU (Nanyang Technological University)
Publication date
1 January 2026
Language
EN
Document type
Thesis