Recycling of zirconia bioceramics from dental prostheses: link between the processes / microstructures / properties
Summary
No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.
Summarise with VIRAT Free to try with your Science Catalogs account.Abstract
The fabrication of technical ceramics is made by three steps: powder synthesis, shaping and sintering. Each step can generate a large amount of waste, which are not or rarely reused. Yttria-stabilized zirconia (YSZ) is a widely used technical ceramic, a bioceramic, especially in dentistry, due to its high mechanical, optical properties and biocompatibility. A YSZ dental prosthesis is generally fabricated by machining of a pre-sintered block. The main drawback of this process is the generation of high quantities of non-used remnants (around 80% / block). For this reason, the question of reusing these wastes to produce new components arises. However, obtaining ceramics with high properties requires strict control of all steps of processing. Replacement of a commercial synthesized powder by a powder derived from pre-sintered waste raises questions about the properties of the final components and their possible uses. The aim of this project is to study the grinding behaviour of pre-sintered blocks and then the behavior of these recycled powders during shaping and sintering. For this purpose, an initial study of dry and wet grinding of pre-sintered blocks is carried out in order to understand how grinding parameters impact the microstructural and physicochemical characteristics of the powders obtained. Here, the aim is to understand and optimize the grinding and shaping steps of the powder, in relation with the microstructural features of the initial blocks. Sintered parts are then obtained using conventional shaping and sintering processes in order to have an initial understanding sintering behaviour of these powders. Different characterizations methods will be used for each step to understand the links between the initial microstructure/powder and processes/microstructure/final properties.
Fields of Study & Subjects
Advanced ceramic materials synthesis
Dental materials and restorations
Recycling and utilization of industrial and municipal waste in materials production
Publication details
- Journal / source
- HAL
- Publication date
- 11 February 2026
- Language
- EN