Comparison of atomic absorption and mass spectrometry for the determination of aluminium and silicon

Summarise with VIRAT
Authors: Karel Zámečník
Cited by: 0

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

The aim of this diploma thesis was to optimize the analytical procedure for the determination of silicon and aluminium in zeolites using Flame Atomic Absorption Spectrometry (F-AAS) and Inductively Coupled Plasma Mass Spectrometry (ICP-MS), and subsequently to compare their suitability for the determination of the selected elements across a wide concentration range. Firstly, both methods were optimized. For F-AAS, optimization involved finding the appropriate height of the light beam above the burner head and the optimal acetylene flow rate. For ICP-MS, it consisted of determining the optimal gas flow rates in the collision cell, RF generator power, and nebulizer argon flow rate. After establishing the optimal conditions, calibrations were performed using single-element CRM standards. The zeolite sample, in the form of a white homogeneous powder, was divided into two portions, which were decomposed in Teflon vessels using microwave-assisted digestion after the addition of selected acids. Upon completion of the digestion, the contents of the vessels were transferred into plastic tubes and diluted to the mark with deionized water. The resulting solutions, labelled "MFI1" and "MFI2", were further diluted 10× and 30× and analysed by both methods. Finally, based on the linear regression equations of the...

Fields of Study & Subjects

Analytical chemistry methods development Laser-induced spectroscopy and plasma Environmental and Analytical Chemistry Studies

Publication details

Journal / source
Digital Repository (National Repository of Grey Literature)
Publication date
1 January 2026
Language
CS
Document type
Thesis