Reflectionless bandpass filter with flat passband, high selectivity, and enhanced out-of-band suppression

Read full text Summarise with VIRAT
Authors: Chen Wei, Wu Wenliang, Xia Mingshan, Huang Mengxing
Cited by: 0

Summary

No summary yet. VIRAT can read this paper and write a plain-language summary of its aim, methods, key findings and limitations.

Summarise with VIRAT Free to try with your Science Catalogs account.

Abstract

Currently, the design of reflectionless filters was challenged by insufficient selectivity and insufficient flatness. Therefore, a two-port microstrip reflectionless bandpass filter topology was proposed to provide a reference for addressing these challenges. The topology of this microstrip circuit was composed of two parallel coupled microstrip lines connected by two short stubs, along with a pair of symmetrical bandstop filter (BSF) connected in parallel, where resistors were used to absorb signals that cannot be transmitted. By analyzing and converting the lumped-element filter with transmission zeros, a microstrip bandpass filter with high selectivity was achieved. Furthermore, the proposed design process could be adapted to meet different requirements for center frequency and bandwidth, offering greater flexibility compared to other design methods. To validate this design, a microstrip bandpass filter with a center frequency of 2.5 GHz was developed. The measurement results indicate that the 3 dB bandwidth is 960 MHz (fractional bandwidth 38.4%), and high selectivity along with a flat passband response are exhibited. The BPF exhibits a 10 dB reflection bandwidth of 203% and an out-of-band rejection of more than 30 dB.

Fields of Study & Subjects

Microwave Engineering and Waveguides Radio Frequency Integrated Circuit Design Antenna Design and Analysis

Publication details

Journal / source
DOAJ (DOAJ: Directory of Open Access Journals)
Publication date
1 January 2026
Language
ZH